BTPKR - C-1452 PRIMER FOR MIL-P-20689D
- MSDS: BTPKR
- Manufacturer: PYRAMID PLASTICS INC TOLBER DIV
- Product Name: C-1452 PRIMER FOR MIL-P-20689D
- National Stock Number: 8030-00-957-6542
Product Identification
Product ID:C-1452 PRIMER FOR MIL-P-20689D
MSDS Date:01/25/1991
FSC:8030
NIIN:00-957-6542
MSDS Number: BTPKR
Responsible Party
HOPE, AR 71801-5212
US
Emergency Phone: 800-264-2535 EXT 2584
Info Phone: 501-777-3251
Cage: 59460
Contractor
Telephone: 501-777-5759
Cage: 59460
Ingredients
LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA, LACOLENE *93/4*
CAS: 64742-89-8
Fraction By Weight: 5-10%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
2-BUTANONE (METHYL ETHYL KETONE) (MEK)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 40-50%
OSHA PEL 200 PPM
ACGIH TLV: 590 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 10-20%
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
CELLOSOLVE (2-ETHOXYETHANOL), DOWANOL EE, ETHYLENE GLYCOL
CAS: 110-80-5
RTECS: KK8050000
Fraction By Weight: 5-10%
OSHA PEL 200 PPM
ACGIH TLV: 18 MG/CUM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. INHALATION: LUNG
IRRITATION. SKIN: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION.
Medical Cond Aggravated by Exposure:SKIN, EYE, LUNG DISORDERS.
First Aid
First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINS. SKIN: WASH W/SOAP &
WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE
VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:26F
Lower Limits:2
Upper Limits:12
Extinguishing Media:CO2, DRY CHEMICAL, ALCOHOL FOAM
Fire Fighting Procedures:WEAR SCBA & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:MATERIAL IS HIGHLY VOLATILE. VAPORS ARE
HEAVIER THAN AIR & MAY TRAVEL TO AN IGNITION SOURCE & FLASH BACK.
Accidental Release
Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. DIKE SPILL
AREA W/SOIL/OTHER INERT MATERIAL. SOAK UP W/ABSORBENT MATERIAL &
STORE IN CLOSED CONTAINERS.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY AREA AWAY FROM
HEAT/IGNITION SOURCES.
Exposure Controls
Respiratory Protection:WEAR NIOSH-APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST: SUFFICIENT TO KEEP EXPOSURE BELOW TLV.
Protective Gloves:SOLVENT RESISTANT.
Eye Protection:SPLASH GOGGLES.
Other Protective Equipment:IMPERVIOUS CLOTHES & BOOTS.
Work Hygienic Practices:NORMAL CLEANLINESS SHOULD BE OBSERVED.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:152F
Vapor Density:>1
Spec Gravity:0.91
Evaporation Rate & Reference:(BU AC = 1): 2
Appearance and Odor:WHITE LIQUID W/KETONE ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT & IGNITION SOURCES.
Hazardous Decomposition Products:CO, CO2, SMOKE IN FIRE.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE &
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.